Heated Prefilter
Heated Prefilter

Heated prefilter model VE112 by J.U.M. Engineering.

1 Heated sample inlet

2µm stainless steel sampler filter

5 'hot' outlets for gas cooler, FID, FTIR

Integrated heated sample pump 12l/min

Ideal for stationairy or transportable CEM's (Continuous Emission Monitoring system)

Heated Prefilter
Weight Approx. 25kg (55 lbs)
Dimensions (W x D x H) 19" (483 mm) x 460 mm x 221 mm
Sample filter material All stainless steel 316SS
Filter pore size 2μm
Sample valves All stainless steel/Viton®
Purge air valve All brass, Plunger and plunger housing stainless steel, seals made from Viton®
Calibration gas valve All brass, or to be specified. Plunger and plunger housing
stainless steel, seals made from Viton®
Sample pump All stainless steel, diaphragm and valves made from Viton®
Sample pump Capacity 12 l/min, unrestricted flow
Oven Temperature 190°C (374°F), electronic temperature controller
Oven Temperature Output 0-5 VDC @ 10mV/°C
Power Requirements 230VAC/50Hz, 1250W (115VAC/60Hz, 850W)
Ambient Temperature 5-43°C (41-110°F)

Available Options

EPC 11 Remote control for sample pump. Pump can be switched on and off externally if Instrument is in external mode.
APO 11 Built in automatic programmable back-purge timer for the sample filter
COS 11 Overflow calibration system for EPA CFR 40, Method 25A
TPR 11 Built in temperature controller for J.U.M. heated sample lines Model TJ 100
and TJ 100A; EXTERNAL MODULE ONLY ON VE 112A!





 

Attachments

Heated Prefilter
Heated Prefilter
Heated Prefilter

Rugged transport case for mobile use (e.g. for mobile FTIR)